Particle board self tapping screws

Particle board wall is a common wall material in the current market, with a flat and beautiful surface, strong texture, and strong durability. In the process of fixing the particleboard wall, screws suitable for this material are required. The specific fixing steps are as follows:

Firstly, use wooden buckles to make the triangular frame, and then use a punching machine to set the position on the wall;

2. Cut the particleboard according to the required length, and then use a flashlight to drill regular sized holes;

3. Insert the screw into the hole and tighten it with a screwdriver.

The above is a general method for fixing particleboard, but in the specific operation process, the following aspects need to be noted:

Before fixing the particleboard, it is best to mark it with a pencil on the board to facilitate drilling holes and inserting screws according to the marked position;

2. The holes on the particle board must be well drilled, and the size of the holes should be slightly smaller than the screws used;

3. The number of screws for the particle board needs to be controlled according to the actual situation to ensure that the particle board can be firmly fixed;

4. In the process of fixing particleboard, tools such as electric drills and screwdrivers need to be used, and safety issues need to be taken into consideration.